欧美精品在线视频,一级毛片无码无卡无遮挡,密臀av免费线观看,激情淫荡少妇人妻视频

Language:CHINESESENGLISH

Home > News > What should be done for steel structure workshop reinforcement?
CONTACT US
  • Address:Pingtang Industrial District, Shipeng Village, Shishan Town, Nanhai District, Foshan City,
  • Phone:0757-81002668/0757-63323396
  • Fax:0757-81196682
  • Contact:Ben Zheng/13826981293 Kerry Lu/13751224830
  • E-mail:sbs@sbsprefabhouse.com
  • URL:http://m.szcxdj.com.cn

What should be done for steel structure workshop reinforcement?

Time:[2022-11-16]  Hits:1745

It is inevitable that various problems will occur in the use of steel structure buildings, especially when they are used to a certain extent and for a certain period of time, some quality problems will inevitably occur, so what should be done to strengthen steel structure plants?

 


Before the reinforcement planning of the steel structure workshop, the reliability appraisal should be carried out in accordance with the Code for Reliability Appraisal of Industrial Buildings and the Code for Reliability Appraisal of Civil Buildings. The content and scope of the reinforcement planning should be determined according to the appraisal results; At the same time, according to the severity of the structural damage consequences and the requirements of the user, determine the safety level of the strengthened building structure.


Keep and use the original structures and components as much as possible to avoid unnecessary removal and replacement, and ensure the safety and durability of the reserved parts; Recycling and reuse of materials shall be considered for the removed parts. In consideration of comprehensive technical and economic indicators, measures shall be taken from the planning and construction organization to reduce the construction period as much as possible, and the reduction of strikes and production stoppages shall not affect the use of buildings as much as possible.


The steel structure workshop is damaged due to high temperature corrosion, freeze-thaw oscillation, uneven settlement of foundation and other reasons. The reinforcement must also consider eliminating, reducing or offsetting these adverse factors to avoid further deterioration and secondary reinforcement.

 


Then the reinforcement methods of steel structure workshop also include the following categories:


1. Enlarged section reinforcement method: this method has simple construction technology, strong adaptability, and mature planning and construction experience; It is applicable to the concrete reinforcement of beams, slabs, columns, walls and general structures;


However, the wet operation time of on-site construction is long, which has a certain impact on production and days, and the building clearance after reinforcement has been reduced to a certain extent.


2. Replacement concrete reinforcement method: the advantages of this method are similar to that of the enlarged section method, and the clearance of buildings will not be affected after reinforcement, but there is also the disadvantage of long wet operation time of construction;


It is applicable to the reinforcement of concrete bearing members such as beams and columns with low concrete strength or severe defects in the compression zone.


3. Bonded wrapped steel reinforcement method: this method is also known as wet wrapped steel reinforcement method, which is characterized by easy stress, simple construction, small on-site workload, but large steel consumption, and should not be used in high temperature places above 600C without protection;


It is applicable to the reinforcement of concrete structures that are not allowed to significantly increase the section size of the original members, but require a substantial improvement in their bearing capacity.


4. Reinforcement method by pasting steel plates: this method is fast in construction, no wet operation on site or only a few wet operations such as plastering, which has little impact on production and days, and has no significant impact on the appearance of the original structure and the original clearance after reinforcement, but the reinforcement effect depends largely on the adhesive process and operation level;


It is applicable to the reinforcement of flexural or tensile members under static force and in normal humidity environment.


5. Reinforcement method of pasting fiber reinforced plastic: in addition to the similar advantages of pasting steel plates, it also has the advantages of corrosion resistance, moisture resistance, almost no increase in the dead weight of the structure, durability, low maintenance costs, etc., but requires special fire prevention treatment, which is applicable to concrete structural members and general structures with various mechanical properties.


6. Wire winding method: the advantages and disadvantages of this method are similar to those of the enlarged section method; It is applicable to the reinforcement of concrete structural members with insufficient diagonal section bearing capacity, or the occasion where lateral restraint force is required on compression members.


7. Anchor bolt anchoring method: this method is applicable to the reconstruction and reinforcement of concrete bearing structures with concrete strength grade of C20~C60; It is not applicable to the above structures and light structures that have been severely weathered.

Copyright:佛山市勝邦鋼結(jié)構(gòu)有限公司 Foshan Shengbang Steel Structure Co., Ltd. Record Number:粵ICP備13078463號
东北免费毛片| 欧美亚洲色Aⅴ大片| 性色aⅴ极品无码专区亚洲| 久久综合福利| 亚洲av无码一区二区在线| 久久久丰满熟妇中文字幕| 丰满妇女做a级毛片免费观看| 中文字幕日韩高清| 久久久久久夜色| 一本一本久久a久久精品宗合| 人人超人人超碰| 3D新金瓶玥菲无删减完整版| 欧美色飘香影院| 韩国青草无码自慰直播专区| 在线成人爽片免费看| 尹人视频xxxx| 人妻丰满熟妇岳av无码区| 猫咪av无码av高潮av喷吹| 五月夜影院毛片| 国产亚洲日本麻豆| 一本色道久久综合无码人妻软件| 国产特级XXXX| www.69国产| 人人综合三级| 亚洲精品视频7777| 国产在线精品99一区不卡日韩 | 国产精品十八禁在线观看| 亚洲国产成人麻豆精品| 成人免费区一| 亚洲日本中文字幕乱码在线电影| 伊人色综合网久久天天| 欧美日韩国产自| 另类天堂Av二| 加勒比色综合久久久久久久久 | 久久久精品黄色艹片| 日韩AV全部免费观看| 亚洲中文字幕aⅴ天堂精品| 看毛片一二三级免费的| 欧美大尺寸视频| 曰批国产精品视频| 一区二区AV在线|